Front Suspension, Steering and Brakes
I've assembled the suspension using PST's Polygraphite Bushings and all new Grade 8 hardware. I also purchased the complete steering kit from PST. Also you can see the new KYB gas shocks. The coil springs are standard height Big Block springs I got from National Parts Depot. To help with cornering, I also purchased some mammoth 1 3/8" anti-sway bars from Malibu Performance in California.
No flash player!
It looks like you don't have flash player installed. Click here to go to Macromedia download page.
Powered by Flash Gallery
January 2001
To take advantage of newer technologies in braking, I chose to use Baer Brakes 13" front disc brake assemblies. Since I will also be using the Global West Negative Roll suspension, I ordered the brake assembles on B-Body spindles. In addition to the tubular upper arms, I've replaced the lower stock arms with tubular pieces made my Fat-Man Fabrications. All control arms are using Global West's Del-Alum bushings. Also I chose Global West springs and Koni adjustable shocks to finish the combo. In the last photo of this set, I plumbed the remote steering reservoir using lines and fittings from a local hydraulic parts supplier.
No flash player!
It looks like you don't have flash player installed. Click here to go to Macromedia download page.
Powered by Flash Gallery
